Benutzer-Werkzeuge

Webseiten-Werkzeuge


firmware:downloads

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

Link zu der Vergleichsansicht

Beide Seiten, vorherige Überarbeitung Vorherige Überarbeitung
Nächste Überarbeitung
Vorherige Überarbeitung
firmware:downloads [2019/08/10 12:21]
stefans add Alice to o2box4421, move to top (alphabetical)
firmware:downloads [2020/02/28 15:53] (aktuell)
stefans add FritzBox3370
Zeile 23: Zeile 23:
 {{:​firmware:​easybox803a:​freifunk-berlin-dev-sam0815-dd2f75e-arcadyan_arv752dpw22-sysupgrade.tar.gz | Easybox803a minimal Freifunk Berlin (dev-sam0815-dd2f75e) sysupgrade, 24.07.2019}}\\ {{:​firmware:​easybox803a:​freifunk-berlin-dev-sam0815-dd2f75e-arcadyan_arv752dpw22-sysupgrade.tar.gz | Easybox803a minimal Freifunk Berlin (dev-sam0815-dd2f75e) sysupgrade, 24.07.2019}}\\
 {{:​firmware:​easybox803a:​2019.04.06_adsl_freifunk-berlin-dev-sam0815-e7fb25c-arcadyan_arv752dpw22-sysupgrade.tar.gz | Easybox803a ADSL Freifunk Berlin (dev-sam0815-e7fb25c) sysupgrade, 06.05.2019}}\\ {{:​firmware:​easybox803a:​2019.04.06_adsl_freifunk-berlin-dev-sam0815-e7fb25c-arcadyan_arv752dpw22-sysupgrade.tar.gz | Easybox803a ADSL Freifunk Berlin (dev-sam0815-e7fb25c) sysupgrade, 06.05.2019}}\\
 +-> Freifunk Wizard does not finish/​reboot due developer mode -> Save & Apply -> manual reboot\\
 +-> ignore "set password page" if password is set
 +
 +
 +**FritzBox3370** ->​[[https://​openwrt.org/​toh/​avm/​fritz.box.wlan.3370|OpenWRTWiki]] -> [[https://​openwrt.org/​toh/​avm/​fritz.box.wlan.7312#​buildenable_smp_kernel|SMP & irqbalance]] -> [[https://​openwrt.org/​docs/​guide-user/​network/​wan/​isp-configurations|xDSL]]\\
 +
 +{{:​firmware:​fritzbox3370:​freifunk-berlin-dev-sam0815-dd2f75e-avm_fritz3370-rev2-hynix-eva-nodsl.bin.tar.gz | FritzBox3370 hynix noDSL Freifunk Berlin (Dev-SAm0815 rev dd2f75e), 24.07.2019}}\\
 +{{:​firmware:​fritzbox3370:​freifunk-berlin-dev-sam0815-dd2f75e-avm_fritz3370-rev2-micron-eva-nodsl.bin.tar.gz | FritzBox3370 micron noDSL Freifunk Berlin (Dev-SAm0815 rev dd2f75e), 24.07.2019}}\\
 +{{:​firmware:​fritzbox3370:​freifunk-berlin-dev-sam0815-dd2f75e-avm_fritz3370-rev2-hynix-eva-xdsl.tar.gz | FritzBox3370 hynix xDSL Freifunk Berlin (Dev-SAm0815 rev dd2f75e), 24.07.2019}}\\
 +{{:​firmware:​fritzbox3370:​freifunk-berlin-dev-sam0815-dd2f75e-avm_fritz3370-rev2-micron-eva-xdsl.tar.gz | FritzBox3370 micron xDSL Freifunk Berlin (Dev-SAm0815 rev dd2f75e), 24.07.2019}}\\
 +-> use noDSL for non-DSL setups -> prevents DSL modem connection loop attempts\\
 +-> xDSL -> AnnexB firmware\\
 -> Freifunk Wizard does not finish/​reboot due developer mode -> Save & Apply -> manual reboot\\ -> Freifunk Wizard does not finish/​reboot due developer mode -> Save & Apply -> manual reboot\\
 -> ignore "set password page" if password is set -> ignore "set password page" if password is set
Zeile 62: Zeile 74:
  
  
-**TPLink CPE210_v2** ->​[[https:/​/github.com/openwrt/​openwrt/​pull/​642|OpenWRT pull request]], [[https://​forum.freifunk.net/t/tp-link-cpe210-v2-gluon-support/​15309/​112|forum.freifunk.net]],​ [[https://​github.com/​freifunk-berlin/​firmware/​tree/​SAm0815_experimental|git-source]]\\ +**TPLink CPE210_v2** ->​[[https://​openwrt.org/toh/tp-link/cpe210|OpenWRTWiki]]\\ 
--> no official OpenWRT support @moment, ​do not flash CPE210_v1 -> different hardware\\+-> do not flash CPE210_v1 -> different hardware\\
 -> flash [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|factory]] image via stock web interface -> if upload error -> try shorter filename, recovery.bin did work\\ -> flash [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|factory]] image via stock web interface -> if upload error -> try shorter filename, recovery.bin did work\\
--[[https://​wiki.freifunk.net/Glossar#OLSR|OLSR 0.9.0.3]]\\ + 
--> tested: ​Lan/Uplink, Wifi (AP+AdHoc+Private)OLSR-Wifi/Lan-Mesh\\+{{:​firmware:​tplink_cpe210_v2:​2019.12.13_notunnel_freifunk-berlin-development-b255cf3-tplink_cpe210-v2-factory.tar.gz|TPLink CPE210_v2 Freifunk Berlin_notunnel-development-b255cf3,​ 13.12.2019}}, ​[[https://​wiki.openwrt.org/doc/​faq/​before.installation#what_is_the_difference_between_the_different_image_formats|factory]]\\ 
 +{{:​firmware:​tplink_cpe210_v2:​2019.12.13_notunnel_freifunk-berlin-development-b255cf3-tplink_cpe210-v2-sysupgrade.tar.gz|TPLink CPE210_v2 Freifunk Berlin_notunnel-development-b255cf3,​ 13.12.2019}},​ [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|sysupgrade]]\\ 
 +-> tested: ​wizardmesh-node\\ 
 +-> ignore „set password page“ if password is set\\ 
 +-> bugs: box did reboot while editing wiki
  
 {{:​firmware:​tplink_cpe210_v2:​freifunk-berlin-hedy-1.1.0-alpha-sam0815-c4a9c96-cpe210-v2-factory.tar.bz2|TPLink CPE210_v2 Freifunk Berlin Hedy 1.1.0-alpha-SAm0815 c4a9c96, 03.03.2018}},​ {{:​firmware:​tplink_cpe210_v2:​freifunk-berlin-hedy-1.1.0-alpha-sam0815-c4a9c96-cpe210-v2-factory.tar.bz2|TPLink CPE210_v2 Freifunk Berlin Hedy 1.1.0-alpha-SAm0815 c4a9c96, 03.03.2018}},​
  ​[[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|factory]]\\  ​[[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|factory]]\\
 {{:​firmware:​tplink_cpe210_v2:​freifunk-berlin-hedy-1.1.0-alpha-sam0815-c4a9c96-cpe210-v2-sysupgrade.tar.bz2|TPLink CPE210_v2 Freifunk Berlin Hedy 1.1.0-alpha-SAm0815 c4a9c96, 03.03.2018}},​ [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|sysupgrade]]\\ {{:​firmware:​tplink_cpe210_v2:​freifunk-berlin-hedy-1.1.0-alpha-sam0815-c4a9c96-cpe210-v2-sysupgrade.tar.bz2|TPLink CPE210_v2 Freifunk Berlin Hedy 1.1.0-alpha-SAm0815 c4a9c96, 03.03.2018}},​ [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|sysupgrade]]\\
 +-> tested: Lan/Uplink, Wifi (AP+AdHoc+Private),​ OLSR-Wifi/​Lan-Mesh\\
 +-> [[https://​wiki.freifunk.net/​Glossar#​OLSR|OLSR 0.9.0.3]]\\
  
 +**TPLink WA901ND_v3** ->​[[https://​openwrt.org/​toh/​tp-link/​tl-wa901nd|OpenWRTWiki]]\\
 +-> due [[https://​openwrt.org/​supported_devices/​openwrt_on_432_devices | 4MB Flash limitation]] no Freifunk image is available
  
-**TPLink ​WR710N_V2** ->​[[https://​wiki.openwrt.org/​toh/​tp-link/​tl-wr710n|OpenWRTWiki]]\\+{{firmware:​tplink_wa901nd_v3:​2019.11.11_openwrt-ar71xx-tiny-tl-wa901nd-v3-squashfs-factory.tar.gz | TPLink WA901ND_v3 OpenWrt_master,​ 11.11.2019}},​ [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|factory]]\\ 
 +{{firmware:​tplink_wa901nd_v3:​2019.11.11_openwrt-ar71xx-tiny-tl-wa901nd-v3-squashfs-sysupgrade.tar.gz | TPLink WA901ND_v3 OpenWrt_master,​ 11.11.2019}},​ [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|sysupgrade]]\\ 
 +-> additional packages: LuCI 
 + 
 + 
 +**TPLink ​WR710N_v2** ->​[[https://​openwrt.org/​toh/​tp-link/​tl-wr710n|OpenWRTWiki]]\\
 -> due 4MB Flash limitation Batman-adv packages only fit on noVPN images (openvpn-polarssl +X removed)\\ -> due 4MB Flash limitation Batman-adv packages only fit on noVPN images (openvpn-polarssl +X removed)\\
 -> !!switched ports: LAN is LAN/WAN and LAN/WAN is LAN - helps if Vlan capability is needed @Wan\\ -> !!switched ports: LAN is LAN/WAN and LAN/WAN is LAN - helps if Vlan capability is needed @Wan\\
Zeile 80: Zeile 105:
  
 {{:​firmware:​tplink_wr710n_v2:​kathleen-0.3.0-tl-wr710n-v2-factory_vpnuplink_switch_wifi.tar.bz2 | TPLink WR710N_V2 Freifunk Berlin OpenWrt 0.3.0-kathleen,​ 02.12.2017}},​ [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|factory]]\\ {{:​firmware:​tplink_wr710n_v2:​kathleen-0.3.0-tl-wr710n-v2-factory_vpnuplink_switch_wifi.tar.bz2 | TPLink WR710N_V2 Freifunk Berlin OpenWrt 0.3.0-kathleen,​ 02.12.2017}},​ [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|factory]]\\
--> additional packages: olsrd-mod-txtinfo,​ olsrd-mod-watchdog,​ luci-app-openvpn,​ luci-app-firewall,​ luci-app-owm-ant,​ luci-app-owm-gui 
- 
 {{:​firmware:​tplink_wr710n_v2:​kathleen-0.3.0-tl-wr710n-v2-sysupgrade_vpnuplink_switch_wifi.tar.bz2 | TPLink WR710N_V2 Freifunk Berlin OpenWrt 0.3.0-kathleen,​ 02.12.2017}},​ [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|sysupgrade]]\\ {{:​firmware:​tplink_wr710n_v2:​kathleen-0.3.0-tl-wr710n-v2-sysupgrade_vpnuplink_switch_wifi.tar.bz2 | TPLink WR710N_V2 Freifunk Berlin OpenWrt 0.3.0-kathleen,​ 02.12.2017}},​ [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|sysupgrade]]\\
 -> additional packages: olsrd-mod-txtinfo,​ olsrd-mod-watchdog,​ luci-app-openvpn,​ luci-app-firewall,​ luci-app-owm-ant,​ luci-app-owm-gui -> additional packages: olsrd-mod-txtinfo,​ olsrd-mod-watchdog,​ luci-app-openvpn,​ luci-app-firewall,​ luci-app-owm-ant,​ luci-app-owm-gui
  
 {{:​firmware:​tplink_wr710n_v2:​kathleen-0.3.0-tl-wr710n-v2-factory_novpnuplink_switch_wifi_batman.tar.bz2 | TPLink WR710N_V2 Freifunk Berlin OpenWrt 0.3.0-kathleen,​ 02.12.2017}},​ [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|factory]]\\ {{:​firmware:​tplink_wr710n_v2:​kathleen-0.3.0-tl-wr710n-v2-factory_novpnuplink_switch_wifi_batman.tar.bz2 | TPLink WR710N_V2 Freifunk Berlin OpenWrt 0.3.0-kathleen,​ 02.12.2017}},​ [[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|factory]]\\
--> noVPNuplink (Batman-adv included) -> needs to mesh with VPN capable Freifunk node (offloader) 
- 
 {{:​firmware:​tplink_wr710n_v2:​kathleen-0.3.0-tl-wr710n-v2-sysupgrade_novpnuplink_switch_wifi_batman.tar.bz2 | TPLink WR710N_V2 Freifunk Berlin OpenWrt 0.3.0-kathleen,​ 02.12.2017}},​ {{:​firmware:​tplink_wr710n_v2:​kathleen-0.3.0-tl-wr710n-v2-sysupgrade_novpnuplink_switch_wifi_batman.tar.bz2 | TPLink WR710N_V2 Freifunk Berlin OpenWrt 0.3.0-kathleen,​ 02.12.2017}},​
  ​[[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|sysupgrade]]\\  ​[[https://​wiki.openwrt.org/​doc/​faq/​before.installation#​what_is_the_difference_between_the_different_image_formats|sysupgrade]]\\
 -> noVPNuplink (Batman-adv included) -> needs to mesh with VPN capable Freifunk node (offloader) -> noVPNuplink (Batman-adv included) -> needs to mesh with VPN capable Freifunk node (offloader)
firmware/downloads.1565432461.txt.gz · Zuletzt geändert: 2019/08/10 12:21 von stefans